Applied Systems Technologies
5250 Flowmeter
5250 Flowmeter
Couldn't load pickup availability
Overview
The CDI 5250 is a modified version of the 5200 model that allows installation under pressure. It incorporates two valves through which the probes pass and a muffler that collects chips from the drilling process. It takes an equal amount of installation time as our standard meters and requires no shutdown of the compressed-air system. $995 – $1165.
Features
- No system shutdown required
- Installs in minutes
- Weather resistant and surge protected
- Milliamp output
- Pulse output convertible to threshold output
- User-configurable scaling, filtering and units of measure
- Optional wired outputs for networking
The installation of the 5250 is quick, easy and safe, if done with adequate preparation and with care. A solid footing and face protection are essential. Once installed, the meter provides the same features as our 5200-series meters.
Technical Specs
|
Number of Rings |
2 Rings |
|
Type of Pipe |
Metric Aluminum, Sch. 40 Steel, Type L Copper |
|
Nominal Pipe Sizes |
1/2 in. – 1-1/2 in., 25 mm – 40 mm, DN15 – DN40 |
|
Accuracy |
5 percent of reading plus 1 percent of range for flows from 10 percent to 100 percent of indicated range at air temperatures between 20 and 120 degrees Fahrenheit |
|
Fluids |
Compressed Air, Nitrogen |
|
Operating Pressure |
130 psig maximum |
|
Input Power |
250 mA at 24 Vdc |
|
Output Resistance |
600 Ohms max. |
|
Exposed Materials |
Stainless steel, gold, thermal epoxy and Viton (seal) |
|
Ring Material |
Aluminum |
|
Display |
Four digit LED display |
|
Response Time |
One second to 63 percent of change in value at flows above 30 percent of range. |
Resources
Click the files below to download
